Homedics shiatsu massager,I use a trick to improve the quality of the massager by 10 times
Urban white-collar workers often sit in the office for a long time, focusing on the work. The physically exhausting after sitting for hours at a time can be not second to physical labor’s. In this case, using a massager to relax is undoubtedly the ideal way.
The current massage market is no longer a “red sea” for competition, but a “dead sea”. Jokingly, massagers are no longer sold as standard 3C products, but by weight. What a tragic but true joke！Plenty of shoddy products flood the massage market.
Nowadays, many massagers are directly plugged in. For human body, the voltage below 36V is the safe voltage. In terms of domestic standards, the product must have certification of safety regulations. According to the mandatory standard of national standard, the product should have CCC certification. The power adapter of massager should pass 3C certification. The length of the power wire of the directly connected massager should be no less than 1.83 meters for preventing human body from electric shock.
Many massagers are made of plastics and sponges, and so they must be protected from overheating and overcurrent, so as not to overload the product and cause spontaneous combustion and fire. Massagers all have heating function, so there must be protective measures for accessory parts to avoid the risk of heating and scald. The weak plastic shell and impact resistance will also cause the risk of electric shock. What’s more, the external radiation and interference will be dangerous to the human body and equipment as well.
Relatively speaking, the product that has safety certification increases a layer of safety safeguard for human body. Qirui requires each product to have a test report and safety certification. Even with safety certifications, Qirui requires employees to make it a habit to take safety responsibilities. The whole machine must pass the aging test for more than 200 hours to keep the product fully functional. The cycle tests of products are conducted in the environment with high temperature 60C°±2C° and low temperature -20C°±2C° for 24 hours, ensuring the normal operation, appearance and function. There should be no foreign object inside the product which may cause fire, electric shock and mechanical abnormality. Power adapter must pass 3000V high voltage in short time, the high voltage safety test, and be no abnormal before leaving factory.